LYONS MANUFACTURING, INC.

Construction Products Since 1957

8900 Forney Road     Dallas, Texas 75227-4505 Tel:  214/381-8100      Fax:  214/381-8158

Products

The Product Application Guide will help you select which of our products will address your problem or situation.
 

PAVECRETE is a unique single component product, specifically designed to rub, smooth and finish vertical concrete. It will feather edge without chipping or flaking and will retain its hardness and toughness. Provides a smooth consistent light gray finish to blend with exterior cured concrete. PAVECRETE comes in a light gray, it is also available in white and sand mix.  Product Description MSDS Job Examples   PAVECRETE PLUS is a versatile polymer-modified single component product. It can be used to rub, smooth and finish vertical and overhead concrete. PAVECRETE PLUS can also be as a skim underlayment or applied as a ¼” horizontal topping for foot to car traffic. It has extended working time and an exceptional bond strength. PAVECRETE PLUS comes in a light gray, it is also available in white.  Product Description MSDS   PATCHCRETE is a very versatile product with an outstanding bonding characteristic. It is a two component product, a single unit includes a 45 lbs. bag of powder with a gallon of liquid polymer. It can be applied horizontally, vertically or even overhead. Horizontally, it may be applied from featheredge to 2 ½ inch thickness (over ½ inch with aggregate) in one application, may be applied as a topping or underlayment. It can also be mixed to a thicker consistency and used as a trowelable repair material for wall and overhead applications. PATCHCRETE comes in light gray or white and can accept integral color or stains.  Product Description MSDS Powder MSDS Liquid Job Examples   FLOWCRETE is our interior self-leveling material with outstanding strength and bonding. It can be used as an underlayment or a wearing surface for walking and light traffic. It has a compressive strength exceeding 7000 PSI. It may be applied from featheredge to 3 inches in one application. No curing or troweling is required for FLOWCRETE. It may be used over cutback and is pumpable. FLOWCRETE utilizes P-100 Primer as its surface bonder.  Product Description MSDS Job Examples   SUPER FLOWCRETE is an interior self-levelling product with a wide variety of applications. It can be used as an underlayment or a wearing surface. SUPER FLOWCRETE has a high abrasion resistance and can be used in warehouse or light manufacturing environments with hard rubber tire forklift traffic. As it accepts integral color or stain SUPER FLOWCRETE can also be used as a decorative topping. It has a compressive strength exceeding 6000 PSI. It may be applied from featheredge to 2 inches in one application. No curing or troweling is required for SUPER FLOWCRETE. It may be used over cutback and is pumpable. SUPER FLOWCRETE utilizes P-100 Primer as its surface bonder.  Product Description MSDS   FINISHCRETE is a specially designed single component product to be used in thin toppings or coverings where there is a need to quickly apply non-breathable coatings or flooring products. It can be applied indoor or outdoor, horizontal or vertical. It utilizes a self-drying technology that permits non-breathable coatings to be applied after only 1 - 2 hours. It is ideal for applying to walls prior to painting. FINISHCRETE can also be used for parging walls prior to application of waterproof membranes. It is also ideal for skim coating or quick patching floors prior to installation of epoxy, polyurethane coatings or seamless flooring systems.  Product Description MSDS   P-100 is an excellent quick drying primer and surface bonder with extremely high solids count. It is a film forming, VOC compliant and will re-emulsify only one time, eliminating moisture sensitivity. P-100 is required to be used as a primer with FLOWCRETE, and POWER-CRETE. It can also be used as an integral polymer modifier for cement mortars.  Product Description MSDS   FLOW-ROCK is an extra strong, expansive anchoring cement with compressive strength exceeding 11,000 PSI and pull out strength exceeding 35,000 PSI. It may be used for a wide variety of anchoring applications. Excellent for handrail and anchor bolt applications.  Product Description MSDS   SUPER FLOW-ROCK is an extra strong, expansive anchoring cement designed for environments with heavy or even continuous exposure to water. SUPER FLOW-ROCK has a compressive strength exceeding 9,500 PSI and a pull out strength exceeding 40,000 lbs. It may be used for a wide variety of anchoring applications.  Product Description MSDS   PLUG-CRETE stops water leaks immediately. It is ready to plug in 60-90 seconds and hard in 2-3 minutes. PLUG-CRETE reaches a compressive strength of over 8000 PSI. PLUG-CRETE is also available in 5-7 minute and 12-15 minute hardness times.  Product Description MSDS   POWER-CRETE is a one component structural repair material. It is rapid setting, with a high early strength and an outstanding bond. POWER-CRETE can be applied from ½ inch to 6 inch with no aggregate needed. It can be used in horizontal repairs interior or exterior, above or below grade. POWER-CRETE utilizes P-100 Primer as its surface bonder.  Product Description MSDS   PAVEQUICK HR is a rapid setting road and highway repair. It has a high early strength, about 2600 PSI, allowing repairs to be ready for service in two hours. PAVEQUICK HR can be used from 2 inch to FULL DEPTH and expands slightly allowing a tight fit to help reduce water penetration. PAVEQUICK HR meets or exceeds most state DOT criteria. Please contact us for current state approvals.  Product Description MSDS   ACRYLIC-BOND is architectural quality acrylic latex emulsion for interior or exterior use as an admixture for concrete. It has a high solids content and can be used for a wide variety of concrete and masonry applications. ACRYLIC-BOND is non-reemulsifiable, it will not rewet with future exposure to water.  Product Description MSDS   BONDALL is a one time reemulsifiable liquid bonding agent and polymer modifier for concrete and masonry. It can be used interior or exterior and as a surface bonder above or below grade. BONDALL has a high solids content and is VOC compliant.  Product Description MSDS

Technical Data and Coverage

Technical Data presented in the literature/specification sheets results from test performed by outside laboratories and is typically developed at 75° F with 50% relative humidity. Values are presented for information purposes and are not necessarily referenced to create specifications. Should assistance in creating specifications be required, contact Lyons Manufacturing, Inc.  For additional technical information for surface preparation, product application or selection of the appropriate product, please contact Lyons Manufacturing, Inc. 214/381-8100.  Coverage information is covered on the COVERAGE page. All coverage rates and information presented are approximate.  Job site conditions including application techniques and procedures and substrate condition will cause coverage rates to vary.  When exact accuracy in estimating coverage is necessary, applying a product in a test area and calculating precise coverage is highly recommended.

Material Safety Data Sheets

Lyons Manufacturing, Inc. manufactures and supplies chemical related products to the construction industry. In making our products, we use certain materials, which require specific precautions to be taken to protect the health and safety of our employees and our customers and their employees. It is our policy to advise our employees and customers regarding any hazardous material contained in any of our products.  Material Safety Data Sheets (MSDS) are available for all products sold by Lyons Manufacturing, Inc. The format for MSDS sheets used by Lyons Manufacturing, Inc. is a version of the OSHA-20 Form designed for the additional information required by the Hazard Communication Standard.  Customers should not use any Lyons Manufacturing, Inc. product without reading the appropriate Material Safety Data Sheet.  While MSDS do not change often, if in doubt, please contact Lyons Manufacturing, Inc. at 214/381-8100 for the most recent version.